JollyJim Air XXL

Children’s wooden swing JollyJim Air XXL

The new square swing for children FATMOOSE JollyJim AIR XXL makes you reach new hights. The best feature is that this swing is made out of 100% pressure treated solid wood. Compared to the swings made out of round wood, there are no plastic or metal connectors needed. This makes assembly easier. With the new wood connectors you transform your double swing to a single swing with the bar slightly protruding beam. On this you can attach a StepUp climbing rope or a monkey swing. You’ll see that this swing offers a lot of fun swing options.

Produkt Details:

• Easy-care, pressure-treated solid wood
• Quality and safety tested – Made in Germany
• Swing beam 9x9 cm and support beams 7x7 cm
• Detailed instructions for easy assembly
• 10-year warranty* on all wooden parts

Delivery Contents:

• Wood package for XXL swing
• 2 ClassicRider swing seats, max. 50 kg load capacity per seat
• 4 SwingFix swing clamps
• Two-part safety caps
• 2 weatherproof FATMOOSE stickers
• Instruction manual and all required fixings

We also recommend:

• 4 Anchors for the assembly of the swing
• 12 SoftSafe safety mats as fall protection

Since wood is a natural product, its dimensions may change after drying or as a result of moisture absorption. Drilling some of the elements yourself helps to ensure an optimum accuracy of fit.

Weight: 56 kg

Attention
Not recommended for children under 3 years of age
For domestic use only under direct adult supervision
The indicated measurements and colours may vary slightly

* The advertised guarantee is valid for all wooden parts if you purchase our anchors at the same time. In any other case, the statutory guarantee will apply. Further information regarding the scope of the guarantee and its enforcement can be found in our guarantee declaration.

Anchoring playground equipment. This is how we do it: stable and safe!

With the FATMOOSE Root series, you'll never again have to worry about the safety and stability of your climbing frame. These products can be used to secure any of the standing posts of your climbing frame.

Assembly tip:

• Assemble the play equipment and place it in its final position. Pay attention to safety distances according to the assembly instructions.
• Mark all of the posts and move aside the play equipment so that holes can be dug to a frost-proof depth. Hole dimensions approx. L30 x W30 x D70 cm.
• Place the play equipment back in its final position and attach all the anchors, if possible on the sides that are not visible.
• Support all the anchors with stones or the play equipment with wooden wedges until it is standing level.
• Pour ready-mixed concrete in up to approx. 10 cm below the surface.
• The rest of the hole can be filled with top soil once the concrete is dry.
   

Choose the perfect anchor for your climbing frame

	SimpleRoot Ground anchor Very stable. The post is stabilised in all directions with 2 screws.They can be attached on the inside of the play equipment so they are not visible from the outside.  Diese müssen in Beton befestigt werden.
	SolidRoot Angle anchor Extremely stable. The post is stabilised in all directions with 3 screws. It's got everything. Maximum stability, great look and even the price is right. This is how we like it at FATMOOSE!
	MasterRoot Ground anchor Most stable solution. The post is stabilised in all directions with 4 screws on 2 sides. This anchor requires a little more effort. For climbing frames with integrated sand pits, the side boards need to be released and reattached over the anchors. Please note: PrimeFix anchors are delivered without screws.

Now you can start shovelling, and an hour or two later, everything's fixed in place.